 |
|
Flex-I-File Sets and Refills
|
| Catalog # |
Description |
Price* |
| flx700 |
Starter Set- 1 frame and 6 assorted tapes |
$ 11.99 |
| flx301 |
3 in1 Set- 3 frames and 16 assorted tapes |
$ 24.99 |
| flx123 |
Combo Set- 1 frame and 19 assorted tapes |
$ 17.99 |
| flx600 |
Refill Tapes (pkg of 6)- Extra Fin |
$ 2.99 |
| flx320 |
Refill Tapes (pkg of 6)- Fine |
$ 2.99 |
| flx280 |
Refill Tapes (pkg of 6)- Medium |
$ 2.99 |
| flx150 |
Refill Tapes (pkg of 6)- Coarse |
$ 2.99 |
| flx321 |
Refill Tapes (pkg of 6)- 2 of each: Fine, Med, Coarse |
$ 2.99 |
| flx550 |
Flex-Set
The complete solution for discovering all the possibilities of the Flex-I-File system. Package includes 1 Flex-I-File frame and 8 assorted tapes plus the complete range of 5 Flex-Pads. |
$ 24.99 |
| flx525 |
Flex-Pad Intro Set of all 5
FLEX-PAD™ puts a "New Angle" on modeling with improved versatility and convenience! Made of flexible polyester abrasives, the padded support provides evenly distributed pressure over irregular surfaces without digging in or scratching. Triple-Grit Polisher/Finisher cleans and polishes in 3 easy steps. Works well on most plastic, metal and painted surfaces. |
$ 16.99 |
| flx801 |
Flex-I-File™ Abrasive Sheets- 3 inch by 4 inch mylar polyester finishing sheets:
Standard Assortment
(2) Sheets - 150 Grit -Black
(2) Sheets - 280 Grit -Orange
(2) Sheets - 320 Grit -Red
(2) Sheets - 600 Grit -Gray |
$ 4.49 |
| flx802 |
Flex-I-File™ Abrasive Sheets- Ultra-Fine Assortment )
(2) Sheets -10,000 Grit -Yellow
(2) Sheets - 6,000 Grit -Aqua
(2) Sheets - 1,500 Grit -Blue
(2) Sheets - 1,000 Grit -Orange |
$ 4.49 |
| flx401 |
Tool-Tender Plus Set
Tool-Tender is a 5 place tool stand in a clear plastic storage case. Instant tool selection at your fingertips with workspace organization in only a 6 by 6 inch area. 4 Flex-I-File™ Frames, 24 assorted abrasive tapes, 5 place stand, clear storage box. |
$ 39.99 |
| flx400 |
Tool-Tender Only (No frames or tapes) |
$ 21.99 |
|
Adhesives, Applicators and Touch-N-Flow System
|
| Catalog # |
Description |
Price* |
| flx7000 |
Touch-N-Flow System
Touch-N-Flow System is a 3-piece set including the popular Touch-N-Flow applicator, applicator squeeze bottle and Ambroid ProWeld liquid solvent cement. Use of the squeeze bottle makes a convenient way to fill and empty the Touch-N Flow applicator. |
$ 16.99 |
| flx711 |
Touch-N-Flow
Touch-N-Flow is the easy-to-handle, lightweight applicator for the precise control of liquid plastic cements and C/A activators.
With Touch-N-Flow you can:
Join seams with a continuous application- no stops to refill a brush.
Apply a micro-droplet with pin-point accuracy.
Reach into tight corners without runs or smears |
$ 6.99 |
| flx720 |
Clean-N-Fill
The perfect accessory for your Touch-N-Flow. The base keeps it ready for instant use. Includes #715 squeeze bottle and plastic base. |
$ 15.99 |
| flx715 |
Touch-N-Flow Filler Bottle
Perfect for filling and emptying the Touch-N-Flow Applicator. |
$ 6.99 |
| flx6003 |
One-Drop Applicator
Bottles allow precise control of solvent cements and other thin liquids. Perfect for filling the Touch-N-Flow. |
$ 6.99 |
| flx6051 |
One-Drop w/ Flex
1/2 oz. Bottle with 20 gauge flexible poly tube allows precise control of thin liquids into hard to reach places. |
$ 6.99 |
| flx805 |
C/A Applicator Tool
A unique tool for applying Cyanoacrylate Cement in a special and unique way. Hold the C/A Applicator in one hand, and dip the tip into a small puddle of C/A Cement. The C/A Applicator will pick up a small amount of C/A Cement and apply it where you want it! You can wipe off the tip with a paper towel or piece of cloth. A small amount of acetone will also help. If the C/A Applicator becomes clogged or has a build-up at the tip, a small hobby knife will remove it. |
$ 6.99 |
| flx6087 |
Scribe-n-Cut Folding Knife |
$ 5.49 |
| flx6114 |
Ultra Fine Needle Point Scriber produces micro-fine scribed panel lines, miniature drill starts, punched holes, rivet marks, etc. Storage space inside handle for extra points. |
$ 5.99 |
| flx6115 |
Scriber Needle Replacements (3/Pk) |
$ 2.99 |
| flx8050 |
Brush Duster
The soft brush that helps you get down into those tiny panel lines
• All those scribed lines that you had a hard time cleaning out before
• The Brush Duster will also help keep your model projects clean from the dust that is always hazardous
• Keeps all your figures and models dust free
• High quality brush for all of your special modeling projects
• The Brush Duster is a brush for the precise model miniaturist |
$ 5.99 |
|
Air-Brush Cleaning Supplies
|
| Catalog # |
Description |
Price* |
| flx7012 |
Cotton Swabs
Needed to swab the paint out of the nozzle and the paint tube of your air-brush. |
$ 1.99 |
| flx7014 |
Pipe Cleaners
Swab the inside of the paint tube of your air- brush. A must that always gets missed! |
$ 2.99 |
| flx7017 |
Small Funnel
You needed one, but just could not find it! Here it is. |
$ 1.99 |
