Cart
1 oz. Insta-Cure+ Gap Filling CA
Manufacture Product Number : BSI-107 INSTA-CURE+™ is a higher viscosity CA for loose fitting joints in which the adhesive must bridge gaps. Normally, the thicker CA is applied to one surface and then the parts are held tightly together for about 5 to 15 seconds. For large surface areas, including those with close fitting joints such as laminations, INSTA-CURE+ ™ should also be used. To prevent premature curing, don’t spread the glue into a thin film. Lay down a serpentine bead with about 1" separations on one surface, then assemble the parts, letting the pressure spread the CA out. |
| Cyanoacrylates (CAs) have become the adhesive of choice for most hobby and household applications. High quality CAs such as Insta-Cure, when used properly, form bonds that in many cases are stronger than the material that is being adhered. Insta-Cure is a highly refined CA which, combined with its freshness, gives a guaranteed two year shelf life.Insta-Cure+ is a higher viscosity CA for loose fitting joints in which the adhesive must bridge gaps. Normally, the thicker CA is applied to one surface and then the parts are held tightly together for about 5 to 15 seconds. |
Type = Paint, Glues and Finishing Supplies
Category = Glues
Date of Release = 2010-01-01
Status = Available
| This item is Normally Stocked but may take up to two weeks for delivery if not in stock. We will notify you of any delays |
Your price $6.99