Cardboard Boxes - water and soda drinks
Manufacture Product Number : MHT-35013 Set contains a total of 32 boxes (7 different designs)
Features:
- Printed on slightly thickened paper to give you a very realistic appearance
- Inside of the boxes is printed as well with brown cardboard texture, so the boxes can be displayed opened as well
Tips:
- Cut out with a really sharp (preferable new) knife and steel ruler
- Be sure to cut out the thick white or black lines between the top and bottom flaps as well, it will allow you for a better assembly with cleaner end-result.
After cutting the entire outline of the box, give 1 cut to the left of the thick line, and 1 cut to the right, then use the tip of your knife and press it where the line is still attached to the box, and swipe the knife sidewards to remove the piece - For easier bending, it is recommended that you use a knife + steel ruler to very gently move over the bending lines. Be sure NOT to press too hard as these lines should not be cut. This will result in nice and sharp bends.
- For Coca Cola and Pepsi boxes you can slightly paint the edges red or blue to remove the white paper color
All models are supplied as kits and will need to be assembled and painted.
The picture illustrates how the model should look once completed.
Glue and paint are not included in the kit.
Type = Scenic and Diorama Materials
Category = Scenic and Diorama Products- Unfinished
Scale = 1/35 Scale
Material = Paper
Date of Release = 2022-08-18
Status = Available
This item is Normally Stocked but may take up to two weeks for delivery if not in stock. We will notify you of any delays
MSRP: $9.99
9.99